12:  Continues to calculate, once the problem is finished, this key 
     no longer works.
13:  Displays the time at which various stages terminated. Format: 
     seconds / minutes / hours
15:  Adjusts and set up scales based on the images on the screen.
21:  Displays the graphics of the slope profile.
31:  Displays the points of the slope geometry with the information 
     about their co-ordinate values.
     (PRESS 'PgDn','PgUp' FOR NEXT, PREVIOUS PAGE, OTHERS FOR EXIT)  
32:  Displays the nodal points of the slip surface with the information 
     about their co-ordinate values.
33:  Displays the random search area.
34:  Displays average stresses of the interfaces. 
     No- number of the interface; N-normal; T-shear 
35:  Displays stresses along the slip surface. 
     No- number of the slice; N-normal; T-shear
41:  Displays the lines with the information about the array IC(I,J).
42:  Displays the phreatic lines with the information about the array 
     ICPH(I,J).
     (PRESS 'PgDn','PgUp' FOR NEXT, PREVIOUS PAGE, OTHERS FOR EXIT)  
51:  Displays the slip surfaces and the interfaces. Select 1,2,3 for 
     initial, random search and final solution respectively. If you 
     need a hard copy of the image, press F1 to erase the menu then 
     press 'screen print' key.
52:  Displays the deformation of the slope. Others same as key:51
61:  Exits
63:  Erases the menu for hard copy printing.
     (PRESS 'PgDn','PgUp' FOR NEXT, PREVIOUS PAGE, OTHERS FOR EXIT)  
    
    
    
   